Power House Foundation

Fabrication drawing, BOQ, 3D Visual bangunan pembangkit listrik tenaga air di wilayah Sumatera

(2020)

Rumah Tinggal 2 Lantai

Skup pekerjaan ini yaitu Design & Build untuk rumah tinggal 2 lantai dengan luasan 210m2.

Proses desain diantaranya perancangan arsitektural, struktural dan MEP.

Proses Build diantaranya pengukuran lahan, pekerjaan struktural, arsitektural, MEP dan landscape.

(2020)

Master Plan BBPK Ciloto

Skup pekerjaan ini yaitu merencanakan landscape/masterplan kampus Cimacan dan kampus utama BBPK Ciloto yang mengakomodir konsep SMK3 (Sistem Manajemen Keamanan, Kesehatan dan Keselamatan Kerja) dan instagramable.

(2020)

ESP Structure

(From PT.YGM) 

Skup pekerjaan ini yaitu perencanaan struktur pondasi mesin ESP (Basic Drawing & Calculation Report).

Struktur pondasi ESP terdiri dari Bor Pile, Pile Cap, Tie Beam, Kolom dan Beam.

Material utama struktur ini yaitu beton bertulang.

(2020)

MCC Room Structure

(From PT.YGM) 

Skup pekerjaan ini yaitu perencanaan struktur MCC Room ESP (Basic Drawing & Calculation Report).

Item struktur MCC Room terdiri dari Bor Pile, Pile Cap, Tie Beam, Pondasi Mesin, Kolom dan Beam, slab dan dinding.

Material utama struktur ini yaitu sbb :

a. Beton bertulang pada bagian pondasi

b. Komposit pada bagian kolom, balok dan slab

c. Dinding dengan material bata heavy duty

(2020)

Bark storage

(From PT.YGM)

Memproduksi Basic Drawing, Detailed Drawing, Bill of Quantity, dan Perhitungan Struktur dan Pondasi. Struktur ini menggunakan SNI, ANSI/AISC, ACI, dan JRA sebagai spesifikasinya.

(2019)

  DAM SITE

                 Dam site area (Dam, Desander & Wingwall) in Taguibo, Philipine.

(2019)

POWER HOUSE

Power House 4MW in Taguibo, Philipine.

(2019)

HBL Tank Foundation

(From PT.YGM)

(2019)

Bridge Structure

(From PT.T)

Gambar kerja, perhitungan, 3D Visual mengenai jembatan sementara sebagai akses penyuplaian material untuk pembangunan Pipa diwilayah Sumatera 

(2019)

    Design & Build - Gantry Crane

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a steel structure for 2-ton gantry crane. This structure is using SNI, ANSI/AISC, EN, LRFD, and JRA as specifications and used to lift heavy loads.

(2018)

Silo Foundation Design  

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a silo foundation. This structure is using SNI as specification and used as bulk material storage.

(2018)

     MEP Modeling

(From: PT. Alien)

Producing Mechanical, Electrical, and Plumbing (MEP) Modeling, Shop Drawing, and As Built Drawing with Building Information Modeling (BIM) system as a reference for implementation in the field.

                       (2018)

Carport

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for carport structure with additional solar panel load and the code uses are SNI, ANSI/AISC, and JRA.

(2018) 

Warehouse Capacity Checking with Additional Solar Panel

Planning (Basic drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for Factory such as warehouse structure, mesh renovation, enterance gate, road access, and bridge.and the code uses are SNI, ANSI/AISC, and JRA.

(2018)

Temporary Bridge Design

(From PT.TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for temporary bridge structure with a 40-meter span. The design consists of superstructure and substructure, and the code uses are SNI, ANSI/AISC, and JRA.

(2018) 

Rice Mill Pre-Engineered Building Design

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a PEB steel structure for rice mill buildings. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as rice mill factory.

                       (2018) 

Chinzei san-highway simulation model

(2018)

Truck Scale

(From PT.T)

Kami mendesain dan berkontribusi dalam pembuatan Basic Drawing & perhitungan beban keseluruhan bangunan dengan teknologi BIM

(2017)

Deck Chiler  

(From: PT. I)

Memproduksi Shop Drawing, As Built Drawing, Bill of Quantity dan Perhitungan struktur rangka baja untuk deck chiller. Struktur ini menggunakan SNI, PPURG, ANSI / AISC, EN, LRFD, dan JRA sebagai spesifikasi dan digunakan sebagai bahan penyimpanan

(2017)

Design & Build - Oil Storage

(From: PT. I)

Design and build an oil storage.

(2017)

Floor Screed  

Plastering and floor screeding.

(2017)

Wind Pipe and Water Pipe Extension

(From: PT. I)

 Wind pipe and water pipe extension and dismantle work.

(2017)

BMC Room Dismantle & Re-layout  

(From: PT. I)

Inspection activity for warehouse and fabrication shop building, the activity such as building measurement, correlation between planning and application, and inspection report.  

(2017)

Factory Design and Renovation 

Planning (Basic drawing, detail drawing, Bill of Quantity, and Calculation Report) for Factory such as warehouse structure, mesh renovation, enterance gate, road access, and bridge.

(2017) 

Ground Water Tank Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) a combined matt foundation with a retaining wall with a depth of 18 m, it is designed to withstand the dynamic soil pressure caused by the earthquake (mononobe method) and hydraulic pressure

(2017) 

House Building Inspection 

( From: PT. SF )

- Weekly Inspection Activity, for checking and make sure to check and ensure corelation planning and implementation, giving advice about HSE (Health, Safety, Environment) and Schedule management. Made weekly inspection report as evaluation material for owner.

(2017) 

Retrofitting Base Plate & Anchorage Design

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for base plate and anchorage reinforcement calculation, without making any destructive causes in the existing pedestal.

(2017)

Bark Chute Conveyor Structure & Foundation Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the additional steel structure for sub chute conveyor staging that has a function as a channel for waste material from the main conveyor. The structure material uses steel pipe with 14m height and 68-degree inclination. Supported by reinforcement concrete spread foundation. The code uses are SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2017) 

Log Watering Tower

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for a support structure for log watering stage planned as steel structure. The code uses are SNI, PPURG '87, ANSI/AISC, ACI, JRA.

(2017) 

Pipe Rack Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) bridge for pipe staging, designs with truss model and direct foundation. The code uses are SNI, PPURG 1987, ACI, and JRA.

(2017)

Warehouse Design

(From: PT. I)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) Planning for warehouse structure with hoist crane using steel structure. The code uses are SNI, PPURG 1987, ANSI/AISC, and JRA.

(2017) 

Hoist Crane Design

(From: PT. I)

Hoist Crane Redesign for factory in MM2100 Industrial Town. Bekasi - West Java.

(April 2017)

Drying Room 

(From: PT. Sp)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) additional structure above the existing drying room for office space requirements, code uses SNI, PPURG, ANSI/AISC, ACI.

(2017) 

As Built Drawing Consultancy

(From: K - Hotel) 

Producting As Build Drawing Architectural and Structural, Analysis the capacity of existing hotel building with 7 story building and 2 basement with earthquake based analysis (SNI 2012), to get existing structural and architectural data, structural data measurement and architectural skecth directly, to get the characteristic of conrete material, Non-Destructive Test (NDT) methode are used. The above data uses as IMB requirements.

( 2017) 

Construction Planning of Masjid Dieng

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a mosque. This structure is using SNI and PPURG as specifications. The scope of the analysis consists of roof structure, column, beam, dome structure, and substructure.

Deck Chiller Building Design   

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a frame steel structure for deck chiller. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as storage materials.

(2016)

Mezzanine Structure Design Using Honeycomb Beam 

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a steel structure for mezzanine use honeycomb beam. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as goods storage.

                        (2016)

Design  & Build - Mezzanine Structure with Retrofitting of Existing Column by Steel Jacketing   

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a steel structure for mezzanine with retrofitting of existing column by steel jacketing method so that additional structure can be added. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as goods storage.

(2016)

Widening Road

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the widening road/access and pavement design calculation. The code used is AASHTO

(2016)

Debarker Foundation Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the dynamic foundation/machine foundation for the debarking machine. The combine block foundation type is used according to ACI specification.

(2016)

Salt Storage Structure & Roof Structure Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the steel roof structure with 18m wide span and 24m length using IWF Steel. The code uses are SNI, PPURG, ANSI/AISC, ACI, and JRA

(2016)

Evaporator Tank Foundation Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the bored pile foundation. The code uses are SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Landslide Stability Analysis and Slope Protection (Gabion)

(From: PT. TDI) 

Analysis and Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for landslide and slope protection (Gabion). The analysis was used Plaxis software and RSNI Geoteknik as a code specification.

 (2016)

Machine Foundation Planning for Bark Crusher

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for dynamic foundation / machine foundation for Bark Crusher, tabletop foundation type is used based on code SNI, PPURG, ANSI/AISC, ACI, and JRA. 

Mounting Conveyor Staging & Foundation Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for steel staging for structure mounting conveyor categorized as medium vibration. The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA.  

Bark Crusher Roofing & Foundation Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for steel roof structure with tall column ( >6m ).The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA.   

Bunker & Foundation Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for matt foundation with concrete wall, with special design criteria that the wall is must strong enough to hold impact load from excavator bucket manuver.The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA.   

(2016)

Additional MCC Room Composite Structure Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for additional structure above the existing structure, design as composite structure type, with steel column, beam and deck plate are covered by concrete The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA

(2016)

PC Sheet Pile Planning

(From: PT. TDI) 

Analysis and Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for landslide and slope protection ( sheet pile ), code uses are RSNI Geoteknik

SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Truckscale Foundation Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for truckscale foundation, combination between pilecap and deep foundation. The code uses are for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA

(2016)

Truckscale Facilities Control Room Planning

(From: PT. TDI)

 Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for control room building, the building material consists of concrete and steel.  SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Truckscale  Facilities Laboratory Building Planning

(From: PT. TDI)

Truckscale  Facilities Log Checker

(2016)

Supports Access Road Planning in Indonesia

(K-Wk Joint Project)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) of temporary building for bridge support, concrete barrier, and foundation based on code  SNI, PPURG, ANSI/AISC, ACI, and JRA. And site visit   

Warehouse Renovation

(From : TASSI)

Warehouse Reparation. Application of BIM with Construction Management to manage cost efficiency (Cost), suitability of execution time (Time), and quality monitoring (Quality).

(2016)

Chipper Building Planning

(From: PT. TDI)

Planning for a warehouse planned as steel structure and supported by the direct foundation. The code uses are SNI, PPURG 1987, ANSI/AISC, and JRA for unit weights of material.

(2015) 

Chipper Foundation Planning

(From: PT. TDI)

(2015)

Debarker Direct Foundation with Pile & Hydraulic Crane Foundation Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for dynamic foundation planned as a direct foundation model with the deep pile. Code uses are RSNI Geoteknik and SK SNI T–15–1991–03.  

(2015) 

Gutter Work Installation

(From: PT. Sp)